Publications Featuring Plywood
This section contains APA publications created to help you design, specify, install and protect APA trademarked plywood in a varity of applications.
| Description: | Date: | Format: | |
|---|---|---|---|
| Publication | Purchase | Download | |
Product Guide: Performance Rated PanelsDescribes performance standards for structural wood panels and the compositions of different types of APA panels with the Performance Rated designations of APA RATED SHEATHING, APA RATED STURD-I-FLOOR and APA RATED SIDING. It also describes the typical applications where Performance Rated panels are used and provides updated trademark and performance category information. Availalbe only as a downloadable PDF. Revised December 2011 (Form F405 - 14 pages) |
12/31/2011 |
Free
![]() 2.8 MB |
|
FRP PlywoodFiberglass-reinforced-plastic plywood applications, advantages, fabrication and specifications. Available only as a downloadable PDF file. Updated June 2007. (Form G215 - 2 pages) |
6/28/2007 |
Free
![]() 154 K |
|
Product Guide: Sanded PlywoodDescribes the specification, advantages, applications and finishing recommendations of sanded plywood. Includes trademark examples and explanations. Available only as a downloadable PDF. Updated May 2011. (Form K435 - 16 pages) |
5/19/2011 |
Free
![]() 1.8 MB |
|
Product Guide: HDO/MDO PlywoodDescribes High Density Overlay (HDO) and Medium Density Overlay (MDO) plywood applications, properties and characteristics, plus shop practice and finishing recommendations. Available only as a downloadable PDF. Updated October 2011. (Form B360 - 14 pages) |
10/17/2011 |
Free
![]() 1.2 MB |
|
Performance Panels OverviewEngineered wood Performance Panel presentation covering production attributes and non-construction and industrial uses. More information available at performancepanels.com. Updated April 7, 2013 |
4/7/2013 |
Free
![]() 6.2 MB |
|
Spanish: Presentación de paneles de desempeño (Performance Panels Overview)Un resumen sobre la producción, las características y usos industriales de paneles de madera diseñados. (Spanish version of Performance Panels Overview). Revised April 7, 2013 |
4/7/2013 |
Free
![]() 5.8 MB |
|
APA 303 Siding Grades Pocket GuideThis pocket guide is designed for use by member mill personnel as an aid in manufacturing and grading APA 303 plywood siding products. Updated December 2010. (Form B850 - 32 pages) |
12/12/2010 |
$2.00
|
|
Build Profit with Wood WallsIntroductory piece to APA's series of wall bracing materials highlighting building design, construction and efficiency advantages of fully sheathing with wood structural panels. This brochure provides tips and resources on how to meet all of these demands and build profitability into your residential construction project. Issued December 2008. (Form J435 - 6 pages) |
12/18/2008 |
$1.00
|
Free
![]() 2.4 MB |
Build Energy Efficient WallsProvides five basic steps to construct energy-saving wood wall systems that meet code, are durable to the forces of nature, and save homeowners money. Issued December 2008. (Form J440 - 16 pages) |
12/30/2008 |
$2.00
|
Free
![]() 1.6 MB |
Hurricane Shutter Design Considerations for FloridaRegion-specific information offers a collection of five hurricane shutter designs with recommendations for a variety of window and door openings in masonry and wood-frame buildings. The designs are based on requirements from the 2007 Florida Building Code. Available only as a free downloadable PDF. Issued August 2009. (Form T460 - 18 pages) |
8/12/2009 |
Free
![]() 4.6 MB |
|
Designing for Combined Shear and Wind UpliftTHIS PUBLICATION HAS BEEN DISCONTINUED. Please refer to Form SR-101 for more information on this topic. (Form K325 - 4 pages) |
8/7/2012 | ||
Fire-Rated SystemsGuide to wood panel systems that meet code and insurance recommendations. Updated June 2005. (Form W305 - 24 pages) |
6/9/2005 |
$3.00
|
Free
![]() 5.5 MB |
Brace Walls with WoodUpdated version of Whole House Wall Bracing brochure. Provides information on wall bracing including code requirements and narrow bracing options for greater design flexibility. Revised November 2008. (Form G440 - 8 pages) |
11/24/2008 |
$2.00
|
Free
![]() 1.8 MB |
Specification Guide: Short Form for PanelsSample specifications for Sheathing, Sturd-I-Floor, Siding, and Sanded Panels. Available only as a downloadable PDF. Updated July 2010. (Form Y310 - 2 pages) |
7/31/2010 |
Free
![]() 200 K |
|
Narrow Walls That WorkTHIS PUBLICATION HAS BEEN DISCONTINUED. Please refer to Form G440 for more information on this topic. (Form D420) |
|||
Engineered Wood Handbook & Grade GlossaryEngineered wood products and common construction terminology explained in easy-to-understand language. Replaces the Panel Handbook and Grade Glossary. Available only as a downloadable PDF file. Revised June 2012. (Form X505 - 53 pages) |
6/22/2012 |
Free
![]() 4.3 MB |
|
Design/Construction Guide: Concrete FormingContains grade information, form maintenance recommendations, design data and several updated project case studies. Update to this version (V345V) also includes the addition of Performance Category 11/16 design recommendations, and the new design values for southern yellow pine. Updated May 2012. (Form V345 - 29 pages) |
5/18/2012 |
$3.00
|
Free
![]() 1.1 MB |
APA System Report: APA Simplified Wall Bracing MethodThe Simplified Wall Bracing Method described in this report provides building officials, builders and designers with an approach and the supporting technical information to meet the requirements of the 2012 IRC Simplified Wall Bracing (Section R601.12). In the development of this report, the 2012 IRC Simplified Wall Bracing has been modified to increase its applicability to a greater percentage of home designs. To achieve broad applicability and acceptance, the system uses the most common type of wall sheathing, wood structural panels, based on their superior structural performance.
|
3/11/2013 |
$1.00
|
Free
![]() 698 K |
Builder Tips: Storage and Handling of APA Trademarked PanelsProvides guidelines to help protect panels from damage in storage, during shipment, and on the job site. Revised May 2013. Now view on mobile devices. Go to: www.apawood.org/buildertips. (Form U450 - 2 pages) |
1/28/2013 |
$0.10
|
Free
![]() 711 K |
Case Study: Las Vegas Elementary SchoolThe Lamb of God Lutheran Elementary School and Administration Building in Las Vegas, described in this case study, features fully sheathed walls. Issued June 2005. (Form F120 - 2 pages) |
6/7/2005 |
$0.50
|
Free
![]() 197 K |
Wood Sheathing Builds BusinessThree residential builders cut callbacks, improve customer relations, and meet code requirements using wood structural panels. This publication describes how three builders in Idaho, Texas, and Ohio gained a competitive edge by fully sheathing the walls of their homes with plywood or OSB. The builders reported improved structural performance and fewer appearance-related callbacks. The testimonials from the builders are consistent with the findings of a recent study conducted by the National Association of Home Builders Research Center. The builders surveyed reported increased racking strength, superior shear resistance, better nailing substrate, and other performance advantages with wood structural panels, compared to other non-structural products. Issued October 2005 (Form F125 - 4 pages) |
10/31/2005 |
$1.00
|
Free
![]() 470 K |
Case Study: Philip Merrill Environmental CenterReaching the apex of sustainable design, the environmental center achieved LEED Platinum status through inspired use of engineered wood products. Issued March 2007. (Form H120 - 2 pages) |
3/31/2007 |
$0.50
|
Free
![]() 202 K |
Case Study: Office of Rogers Krajnak ArchitectsA car repair shop is transformed into a modern office. Issued March 2007. (Form H110 - 2 pages) |
3/31/2007 |
$0.50
|
Free
![]() 219 K |
Case Study: Gunter Primary SchoolConstructed of all wood, this Texas school's unique design concept features wood in exposed and hidden structural applications. Issued March 2007. (Form G170 - 2 pages) |
3/31/2007 |
$0.50
|
Free
![]() 205 K |
Case Study: LeMay -- America's Car MuseumCurved glulam beams and fully sanded plywood sheathing form the roof system of this 165,000 sq. ft. facility created to celebrate America's love affair with the automobile. Available as a downloadable PDF only. Issued July 2012. (N115 - 2 pages) |
7/19/2012 |
Free
![]() 430 K |
|
Voluntary Product Standard, PS 1-09, Structural PlywoodCovers the Voluntary Product Standard PS 1-09, the national standard for producing, marketing, and specifying plywood for construction and industrial uses. Replaces Voluntary Product Standard PS 1-07 Structural Plywood, Form H860. Revised June 2010. (Form L870 - 72 pages) |
6/15/2010 |
$4.00
|
Free
![]() 2.6 MB |
Voluntary Product Standard, PS 1-09 Structural Plywood Pocket GuideCondensed, pocket-sized (3-3/4" x 6 1/2") edition contains excerpts from Voluntary Product Standard PS 1-09, providing expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses. (Form L875 - 88 pages) |
6/30/2010 |
$4.00
|
|
PS 2-10, Performance Standard for Wood-Based Structural-Use PanelsThe APA edition of the updated structural-standard is published with typical APA trademarks and provides information on performance requirements, adhesive bond performance, panel construction and workmanship, dimensions and tolerances, marking, and moisture content of structural-use panels. Revised June 2011. (Form S350 - 64 pages) |
6/20/2011 |
$4.00
|
Free
![]() 1.3 MB |
Performance Standards and Qualification Policy for Structural-Use PanelsAPA PRP-108 - Describes requirements and test methods for APA Performance Rated Panels. Quality Assurance policy is now found in a separate document, Form B455. Revised May 2002 (Form E445 - 74 pages) |
5/15/2002 |
$4.00
|
Free
![]() 829 K |
APA Quality Assurance Policies for Structural-Use Panels Qualified to PRP-108Includes policies and procedures for APA Quality Assurance options, which was previously incorporated in APA PRP-108, Performance Standards and Policies, Form E445. Issued May 2002. (Form B455 - 40 pages) |
5/31/2002 |
$3.00
|
Free
![]() 711 K |
Panel Design SpecificationA manual of recommended design capacities (ASD) and design methods for wood structural panels manufactured under Voluntary Product Standards PS1 and PS2, and APA Performance Standard PRP-108. Includes updated EA-perp values for OSB. Revised May 2012.
|
5/18/2012 |
$3.00
|
Free
![]() 3.0 MB |
Plywood Design SpecificationA manual of section properties, recommended design stresses and design methods for plywood manufactured under Voluntary Product Standard PS 1. This edition remains available, along with PDS Supplements #1-5 until various building code references are updated and new supplements are developed. For the most recent PDS manual, please see Form D510, Panel Design Specification. Revised September 1998. (Form Y510 - 32 pages) |
9/30/1998 |
$2.00
|
Free
![]() 278 K |
Plywood Design Specification, Supplement #1Recommended method for the design and fabrication of curved plywood roof panel. Revised February 1995. (Form S811 - 24 pages) |
2/28/1995 |
$1.00
|
Free
![]() 164 K |
Plywood Design Specification, Supplement #2: Design and Fabrication of Glued Plywood-Lumber BeamsRecommended method for design and fabrication of glued plywood and lumber beams. Revised November 1998. (Form S812 - 24 pages) |
11/30/1998 |
$1.00
|
Free
![]() 161 K |
Plywood Design Specification, Supplement #3Design and fabrication of plywood stressed-skin panels. Third of five supplements to the Plywood Design Specification. Only available as a PDF file. Revised April 1996. (Form U813 - 28 pages) |
4/30/1996 |
Free
![]() 196 K |
|
Plywood Design Specification, Supplement #4Design and Fabrication of Plywood Sandwich Panels. The fourth of five supplements to the Plywood Design Specification. Only available as a downloadable PDF. Revised December 1993. (Form U814 - 16 pages) |
3/31/2004 |
Free
![]() 135 K |
|
Plywood Design Specification, Supplement #5Design and Fabrication of All-Plywood Beams. Only available as a downloadable pdf file. Revised November 2008. (Form H815 - 20 pages) |
11/30/2008 |
Free
![]() 592 K |
|
Technical Note: Minimizing Buckling of Wood Structural PanelsForm X480 has been discontinued. Please refer to Technical Note: Minimizing Buckling of Wood Structural Panels, Form D481. |
|||
Technical Note: Structural Adhesives for Plywood-Lumber AssembliesCovers structural adhesives for strength and stiffness, and semi-structural adhesives for stiffness only. Revised May 1998. (Form Y391 - 4 pages) |
5/31/1998 |
$1.00
|
Free
![]() 65 K |
Technical Note: Corrosion-Resistant Fasteners for ConstructionOutlines bases for fastener recommendations in plywood siding and foundations, and fire-retardant-treated plywood. Revised December 2004. (Form D485 - 2 pages) |
12/30/2004 |
$1.00
|
Free
![]() 82 K |
Technical Note: Fastener Loads for Plywood Ridge Beam ConnectionsDesign loads for lag screws and bolts connecting ridge beam halves. Revised November 1987. (Form M320 - 2 pages) |
11/30/1987 |
$1.00
|
Free
![]() 58 K |
Technical Note: APA Performance Rated Panel Subfloors Under Hardwood FlooringSpecification and installation recommendations for panel subfloors to be used under hardwood flooring. Updated June 2010. Available only as a downloadable PDF. (Form R280 - 2 pages) |
6/30/2010 |
Free
![]() 230 K |
|
Technical Note: Caster Loadings on PlywoodRecommendations for specifying plywood floor products under small wheel (caster) vehicle loads in industrial and commercial environs. Revised December 1999. (Form X227 - 2 pages) |
12/31/1999 |
$1.00
|
Free
![]() 54 K |
Technical Note: Finishing Sanded PlywoodAll wood species contain water-soluble materials which can create a staining problem with water-based light-colored finishes when applied to bare wood. This document covers appropriate finishes. Revised January 1984. (Form J305 - 2 pages) |
1/31/1984 |
$1.00
|
Free
![]() 57 K |
Technical Note: Field Repairs of PlywoodMethods for field restoration of plywood to near its original condition and appearance. Revised September 1999 (Form J805 - 1 page) |
9/30/1999 |
$1.00
|
Free
![]() 54 K |
Technical Note: Staining of Finishes from Water-Soluble ExtractivesDescription, prevention and removal of extractive staining. Revised May 1997 (Form L810 - 2 pages) |
5/31/1997 |
$1.00
|
Free
![]() 55 K |
Technical Note: Fastener Loads for Plywood BoltsSummarizes APA test data on bolted plywood joints. Revised November 1997. (Form E825 - 4 pages) |
11/30/1997 |
$1.00
|
Free
![]() 90 K |
Technical Note: Fastener Loads for Plywood - ScrewsSummarizes APA test data on screwed plywood joints. Revised June 2011. (Form E830 - 5 pages) |
6/20/2011 |
Free
![]() 395 K |
|
Technical Note: Smoothness of Wood-Based Panel SurfacesFactors affecting panel smoothness and product type suggestions. Issued September 1992 (Form S425 - 3 pages) |
9/30/1992 |
$1.00
|
Free
![]() 61 K |
Technical Note: Wood Structural Panel Sheathing or Siding Used to Resist Combined Shear & UpliftTHIS PUBLICATION HAS BEEN DISCONTINUED. Please refer to Form SR-101 for more information on this topic. (Form H335 - 8 pages) |
|||
Technical Note: Understanding the Importance of Structural Wall Sheathing as a Wall CoveringProvides information on wind loads and minimum wall design wind pressures. Updated November 2008. Available only as a downloadable PDF. (Form J430 - 6 pages) |
11/13/2008 |
Free
![]() 335 K |
|
Technical Note: Load-Span Tables for APA Structural-Use PanelsBecause it is sometimes necessary to have engineering design information for structural panel products when used in construction applications, APA provides design capacities for the various span ratings and section properties for various panel thicknesses (see Panel Design Specification, Form D510). This Technical Note contains uniform load tables calculated using these design capacities. Available only as a downloadable PDF. Updated February 2011. (Form Q225 - 14 pages) |
2/11/2011 |
Free
![]() 347 K |
|
Technical Note: Portal Frame Bracing Without Hold-Down DevicesDetails for APA-developed portal frame wall bracing to help provide segments as narrow as 16 inches that can be counted toward the overall bracing percentage required by the International Residential Code (IRC). For use in continuously sheathed walls. Issued July 2008. (Form J740 - 6 pages) |
7/13/2008 |
$1.00
|
Free
![]() 322 K |
Technical Topics: Wood Structural Panels Used as Nailable SheathingDiscussion of Wood Structural Panel's ability to withstand earthquake, wind, wind suction and pressure loads as well as permitting the anchorage of light-weight siding materials. Available as downloadable PDF only. Issued October 26, 2010. (Form TT-109 - 6 pages) |
10/26/2010 |
Free
![]() 413 K |
|
Technical Topics: Wood Moisture Content and the Importance of Drying in Wood Building SystemsGuidance on how to avoid potential moisture problems that could lead to costly and hazardous deterioration as well as health risks when using wood structural products with impermeable materials. Revised March 2011. (Form TT-111 - 3 pages) |
3/7/2011 |
Free
![]() 379 K |
|
Technical Topics: Flame Spread of APA Performance-Rated Wood Structural PanelsReport on surface burning characteristics (i.e. flame spread and smoke development) of wood structural panels tested in accordance with ASTM E84. Available only as a downloadable pdf file. Revised November 4, 2011. (Form TT-010 - 1 page) |
11/4/2011 |
Free
![]() 426 K |
|
Technical Topic: Thermal Resistance of Wood Structural PanelsTT-016 has been superseded by APA ICC ES Report ESR-2586. (TT-016 - 1 page) |
|||
Technical Topics: Allowable Bearing Stress For APA Wood Structural PanelsResults of bearing tests conducted on plywood and OSB specimens of different thicknesses sampled from various mills by APA. Available as downloadable PDF only. Revised January 18, 2013. (Form TT-001 - 3 pages) |
1/18/2013 |
Free
![]() 775 K |
|
Technical Note: Fire-Retardant-Treated (FRT) PlywoodProvides the required treating standards and locations within the building codes where the standards are referenced, as well as where fire-retardant-treated FRT plywood can be safely used. Only available as a downloadable pdf file. Issued January 2009. (Form K320 - 7 pages) |
1/22/2009 |
Free
![]() 241 K |
|
Technical Note: Water Vapor Permeance of Wood Structural Panels and Wood Wall ConstructionBecause moisture vapor can move through exterior wall systems, care must be taken with respect to the design of the wall to prevent excessive condensation and minimize moisture-related problems. This document addresses the water vapor permeance of structural wood panels, vapor retarders and their role in wall-system design. Issued February 2009. Available only as a downloadable PDF. (Form J450 - 6 pages) |
2/11/2009 |
Free
![]() 248 K |
|
Technical Topics: Dusting of Concrete Poured Against Plywood FormsDiscusses causes of surface dusting on concrete surface when poured against plywood forms. Also provides tips for prevention and remedial action. Available only as a downloadable pdf file. Revised February 2012. (Form TT-029 - 2 pages) |
2/23/2012 |
Free
![]() 443 K |
|
Technical Note: Using Wood Structural Panels for Combined Uplift and Shear ResistanceExplains the use of wood structural panels for combined shear and uplift, which can eliminate many of the hurricane ties that are required between the floors of the structure that is already sheathed with wood structural panels due to lateral wind forces. Available only as a downloadable PDF. Updated February 2008. (Form E510 - 6 pages) |
2/21/2008 |
Free
![]() 301 K |
|
Technical Note: Design Capacities of APA Performance-Rated PanelsTHIS PUBLICATION HAS BEEN DISCONTINUED. Please refer to Form D510 for more information on this topic. (N375) |
|||
Technical Topics: Wind Resistance of Wood Structural Panel Sheathed WallsComprehensive information for wind resistance of light-framed walls sheathed with plywood or OSB using the methodology of the 2012 IBC, Table 2304.6.1 and the 2012 IRC, Table R602.3(3). Revised June 6, 2012. (Form TT-110 - 8 pages) |
6/6/2012 |
Free
![]() 990 K |
|
Technical Topics: Staining of Concrete Poured Against PlyformDiscusses the causes of concrete staining and provides some possible solutions. Available only as a downloadable pdf file. Revised March 7, 2012. (Form TT-059 - 2 pages) |
3/7/2012 |
Free
![]() 455 K |
|
Nailed Structural-Use Panel and Lumber BeamsLoad-span tables and fabrication information. Available only as a downloadable PDF. Revised February 2009. (Form Z416 - 6 pages) |
2/28/2009 |
Free
![]() 448 K |
|
Data File: Selection, Installation and Preparation of Plywood UnderlaymentThis APA Data File provides recommendations for the installation and preparation of underlayment under finish flooring in residential and light commercial applications. Recommendations are also provided for the selection of APA plywood Underlayment, a plywood panel grade in accordance with Voluntary Product Standard PS 1, Structural Plywood. This publication is only available as a downloadable PDF. Revised June 2012. (Form L335 - 8 pages) |
6/21/2012 |
Free
![]() 417 K |
|
Installation of Stucco Exterior Finish Over Structural Wood Panel Wall SheathingDescribes recommended wall construction methods for the installation of stucco exterior finish over structural wood panel wall sheathing. Updated September 2006. Available only as a downloadable pdf file. (Form Q370 - 6 pages) |
9/20/2006 |
Free
![]() 231 K |
|
Data File: Preservative-Treated PlywoodSpecifications, uses and advantages, acceptances, technical data, finishing recommendations and identification. Updated August 2008. Only available as a free downloadable PDF. (Form Q220 - 11 pages) |
8/13/2008 |
Free
![]() 214 K |
|
APA Product Report PR-V180, Warmboard, Inc.APA PR-V180 Warmboard® Radiant-Floor Heating Panels, Warmboard, Inc. Revised May 30, 2013. (PR-V180 - 3 pages) |
5/30/2013 |
Free
![]() 111 K |
|
Plywood Centennial DVDThe plywood industry centennial video that was shown at the commemorative banquet in Portland, Oregon on March 18, 2005. The program, approximately 25 minutes in length, covers the people, products, and technology that transformed the industry over its 100-year history. It also features interviews with several longtime industry executives. (Form DV-0003) |
$10.00
|
||
APA Full-Scale House Test Project: Progress Report 1Full Name: APA Full-Scale House Test Project: Progress Report 1, Overview of Test Project. Reports on APA’s three-dimensional, full-scale house test project. This extensive study will investigate the response of braced walls and evaluate how various structural components work as a whole. Available as a PDF only. Issued November 2006. (Form 3D-001 - 4 pages) |
11/20/2006 |
Free
![]() 454 K |
|
APA Full-Scale House Test Project: Progress Report 2Full Name: APA Full-Scale House Test Project: Progress Report 2, Effect of Return Corners and Hold Downs. Reports on APA’s three-dimensional, full-scale house test project. Available as a PDF only. Issued January 2007. (Form 3D-002 - 4 pages) |
1/5/2007 |
Free
![]() 159 K |
|
APA Full-Scale House Test Project: Progress Report 4Full Name: APA Full-Scale House Test Project: Progress Report 4, 3-D Testing with 6:1 Aspect Ratio Portal Frame Wall Bracing. Reports on APA’s three-dimensional, full-scale house test project. Available as a PDF only. Issued January 2007. (Form 3D-004 - 7 pages) |
1/8/2007 |
Free
![]() 315 K |
|
APA Full-Scale House Test Project: Progress Report 5Full Name: APA Full-Scale House Test Project: Progress Report 5, Effect of Bracing Configurations on Isolated Bracing (Method 3). Reports on APA’s three-dimensional, full-scale house test project. Available as a PDF only. Issued January 2007. (Form 3D-005 - 5 pages) |
1/8/2007 |
Free
![]() 195 K |
|
APA Full-Scale House Test Project: Progress Report 3Full Name: APA Full-Scale House Test Project: Progress Report 3, 3D Testing with 4:1 Aspect Ratio Wall Bracing. Reports on APA's three-dimensional, full-scale house test project. Available as a PDF only. Issued January 2007. (Form 3D-003 - 6 pages) |
1/8/2007 |
Free
![]() 332 K |
|
APA Full-Scale House Test Project: Progress Report 7Full Name: APA Full-Scale House Test Project: Progress Report 7, Wall Bracing with a 4:1 Aspect Ratio Using Sheathing Cut Around Openings. Reports on APA’s three-dimensional, full-scale house test project. Available as a PDF only.Issued January 2007. (Form 3D-007 - 5 pages) |
1/23/2007 |
Free
![]() 241 K |
|
Wood Facts: Formaldehyde Emissions and ExemptionsAPA fact sheet addresses the concerns related to structural wood panels and explains why plywood and OSB manufactured to Voluntary Product Standard PS 1-07, Structural Plywood and Voluntary Product Standard PS 2, Performance Standard for Wood-Based Structural-Use Panels, have such low emission levels that they are exempt from the leading formaldehyde emission standards and regulations. Issued August 2008. (Form J330 - 2 pages) |
8/22/2008 |
Free
![]() 143 K |
|
Plywood in Hostile EnvironmentsComplete title: Plywood in Hostile Environments, Physical Properties and Applications, Research Report 132. Information provides guidance for engineers and designers with attention to questions on the physical properties of plywood and their application in extreme conditions. Initial research written in 1975, udated in 2008. Only available as a downloadable PDF. (Form Z820 - 23 pages) |
12/31/2008 |
Free
![]() 332 K |
|
Holding Power of Roof Nails in 3/8" and 1/2" PlywoodLaboratory Report 87: Testing of commercially available deformed shank nails for attaching built-up roof felts to 3/8" and 1/2" plywood. 1961. (Form LR87 - 22 pages) |
12/31/1961 |
Free
![]() 2.1 MB |
|
Research Report: Plywood Floors for Residential GaragesResearch Report 139. Tests and recommendations for plywood garage floors suitable for 2000-lb wheel loads. Only available as a downloadable pdf file. Revised February 2003 (Form E440 - 15 pages) |
2/28/2003 |
Free
![]() 165 K |
|
Fire Hazard Classification of PS 1 PlywoodResearch Report 128. Presents results of U.L. flame-spread testing of 45 combinations of plywood thickness, species, glue type and surface texture. Available only as a downloadable pdf file. Revised May 1997. (Form Y380 - 28 pages) |
5/31/1997 |
Free
![]() 351 K |
|
Plywood End Shear Walls in Mobile HomesResearch Report 151. Describes tests of twelve end walls with varying opening and panel configurations, and fastening systems. Compares results with a computer design method. Issued October 1988. (Form N425 - 28 pages) |
10/6/1988 |
$4.00
|
Free
![]() 1.3 MB |
Book: The Plywood AgeThe Plywood Age was first published in 1955 to commemorate the first 50 years of the industry. This 100th Anniversary Commemorative Edition was released in 2005. The book chronicles the historical development of plywood as the original engineered wood product. (Form F100 - 184 pages) |
$30.00
|
||

Shopping Cart / Checkout

