Technical Document Library

19/32" T&G APA Plywood Underlayment, 15/32" APA Wood Structural Panel Subfloor, 3-Dimensional Detail Typical Details - DT-FR-1 This detail shows floor assembly of APA wood structural panel subfloor over plywood underlayment, building paper, and joists with gypsum wallboard ceiling below. 2021 Supplement to: A Guide to the 2018 IRC Wood Wall Bracing Provisions Technical Guides - 2026 Structural Panel & Engineered Wood Yearbook Market Analysis Reports - MKO-E191 Annual analysis of U.S., Canadian, and global economic factors impacting engineered wood demand, with multi-segment forecasts and historical production data. Available as PDF. 2125 Franklin Student Housing Case Studies - S115 This case study explains how glulam beams and engineered wood products shaped 2125 Franklin, a 735-bedroom mixed-use student housing building near the University of Oregon. 303 Siding Manufacturing Specifications Data File - B840 This publication provides minimum requirements that plywood panels must meet to qualify for classification as APA 303 Series specialty siding. 4 Best Practices for Glulam Installation Technical Guides - Q705 This publication provides simple steps to proper installation that ensures glulam beams perform as designed. A Guide To Engineered Wood Products Technical Guides - C800 Describes common engineered wood products: plywood, oriented strand board (OSB), I-joist, glued laminated timber (glulam), structural composite lumber (SCL) and rim board. A Guide to the 2015 IRC Wood Wall Bracing Provisions Technical Guides - A Guide to the 2015 IRC Wood Wall Bracing Provisions A Guide to the 2018 IRC Wood Wall Bracing Provisions + Free Digital 2021 Supplement Technical Guides - A Guide to the 2018 IRC Wood Wall Bracing Provisions + Free Digital 2021 Supplement A Portal Frame With Hold Downs for Engineered Applications Technical Topic - TT-100 This publication describes the use of portal-frame design in engineered applications and as bracing in conventional light-frame construction Acoustic Performance of All-Wood Floor Systems Technical Note - T230 This publication describes single- and double-layer all-wood floor assemblies for acoustic performance and includes both construction details and acoustic ratings Advanced Framing Construction Guide - M400 This publication explains the components of advanced framing in floor and wall framing, including illustrated construction details Advanced Framing Boosts Energy Performance Case Studies - T110 This case study explains how a Pennsylvania home builder gained a competitive advantage by adopting advanced framing techniques that deliver lasting energy savings to customers. Air Permeability of Wood Structural Panels as Air Barriers Technical Topic - TT-107 This publication answers questions regarding the performance of wood structural panels as air barriers All-Wood Podiums in Mid-Rise Construction Case Studies - N110 This case study discusses how two mid-rise projects used all-wood podiums instead of concrete to cut construction costs, reduce building mass and improve sustainability. Alternate Insulated Three-Stud Corner (with Drywall Clips) Typical Details - DT-AF-1 This detail shows an alternative insulated 3-stud corner framing assembly with drywall clips to support the gypsum from one stud. Angle Bracket Hanger Typical Details - DT-SPR-1 This detail shows angle bracket hanger assembly for supporting steel sprinkler pipe from wood structural members using blocking and optional fastening methods. ANSI 117-2025: Standard Specification for Structural Glued Laminated Timber of Softwood Species Standards - ANSI 117-2025 This ANSI Standard provides information for the design of structural glued laminated timber (glulam), reference values for glulam design and specific layup requirements. ANSI 405-2023: Standard for Adhesives for Use in Structural Glued Laminated Timber Standards - ANSI 405-2023 This ANSI standard provides minimum requirements to evaluate adhesives for use in structural glued laminated timber. This document is a revision of ANSI 405-2018. ANSI A190.1-2022 Product Standard for Structural Glued Laminated Timber Standards - ANSI A190.1-2022 This ANSI Standard contains requirements for the manufacture and quality control of structural glued laminated timber. ANSI/APA PRG 320-2025 Standard for Performance-Rated Cross-Laminated Timber Standards - ANSI/APA PRG 320-2025 This ANSI/APA standard provides requirements and test methods for qualification and quality assurance for performance-rated cross-laminated timber (CLT). ANSI/APA PRP 210-2024: Standard for Performance-Rated Engineered Wood Siding Standards - ANSI/APA PRP 210-2024 This ANSI/APA standard provides requirements and test methods for qualification and quality assurance for performance-rated engineered wood siding. ANSI/APA PRR 410-2021: Standard for Performance-Rated Engineered Wood Rim Boards Standards - ANSI/APA PRR 410 This standard provides requirements and test methods for qualification and quality assurance for performance rated engineered wood rim board. ANSI/APA PRS 610.1: Standard for Performance-Rated Structural Insulated Panels in Wall Applications Standards - ANSI/APA PRS 610.1-2023 This standard covers the manufacturing, qualification, quality assurance, design and installation requirements for performance-rated structural insulated panels used in walls APA - The Mark of Quality for Wood Structural Panels Technical Guides - X400 This publication explains the APA panel trademark and quality standards for wood structural panels APA Glued Floor System Typical Details - DT-EWG-1 This detail shows an APA glued floor system using APA Rated Sturd-I-Floor or sheathing panels. APA Laboratory Testing Capabilities B707 Technical Guides - B707 Learn the APA research facility capabilities, including assembly-level testing of roof and floor building components and performance evaluation of lateral force resisting systems APA Panel Roof Sheathing Typical Details - DT-EWG-2 This detail shows APA Rated sheathing panels installed as roof decking over rafters or trusses with panel clips, asphalt or wood shingles, and proper edge and joint spacing. APA Panel Stair Treads and Risers Typical Details - DT-EWG-3 This detail shows APA panel stair treads and risers installed on stringers in two configurations, using plywood, OSB, or composite panels with 8d common nail fastening. APA Panel Subflooring Typical Details - DT-EWG-4 APA Rated sheathing panels installed as subflooring over 2x joists, I-joists, or floor trusses with tongue-and-groove or blocked edges on a wood-framed floor system. APA Panel Wall Sheathing Typical Details - DT-EWG-5 This detail shows APA Rated wall sheathing applied in two orientations- strength axis across or parallel to studs- with weather-resistive barrier and siding on a wood-framed wall. APA Panel-Deck Block Pallet Design and Specifications Technical Guides - V691 Discusses specifications and design details for the APA panel-deck block pallet, including load capacity, nailing schedules and materials handling system compatibility. APA Performance Rated I-Joists Storage, Handling & Safety Recommendations Builder Tip - Z735 This publication includes important tips for storage, handling and jobsite use of APA Performance Rated I-Joists. APA Performance Rated Panel Subfloors Under Hardwood Flooring Technical Note - R280 This publication provides specification and installation recommendations for panel subfloors to be used under hardwood flooring APA Performance-Rated Rim Board - Canadian Limit States Design Technical Guides - W345 CA This publication describes connection requirements and application notes for APA Performance Rated Rim Board for Canadian Limit States Design APA Performance-Rated Rim Boards Technical Guides - W345 This publication details connection requirements and application notes for APA Performance Rated Rim Board APA Performance-Rated Wood Structural Panels as Thermal Barriers for Foam Plastics Technical Topic - TT-060 Provides a recommendation for foam plastic roof insulation over minimum Performance Category 15/32 engineered wood panels that meet the 15-minute thermal barrier requirement APA PRI-400 Performance Standard for Residential I-Joists Standards - PRI-400 This standard contains performance criteria, qualification requirements and quality assurance information for APA Performance Rated I-joists used in residential floors. APA PRI-400 Performance Standard for Residential I-Joists, Limit States Design for Canada Standards - PRI-400 CA This standard details performance criteria, qualification requirements and quality assurance for APA Performance Rated residential I-joists, limit states design, for use in Canada APA PRI-405 Performance Standard for Commercial I-Joists Standards - PRI-405 This standard contains performance criteria, qualification requirements & quality assurance information for APA Performance Rated I-joists in commercial roof/floor construction. APA PRR-401: Performance Standard for APA Rim Boards Standards - PRR-401 This APA Standard provides dimension and tolerances, performance requirements, test methods and qualification policy for APA Performance Rated Rim Board. APA Rated Lap Siding Over Wood Structural Panel Sheathing Typical Details - DT-EWG-6 This detail shows APA Rated lap siding installed over wood structural panel sheathing with a weather-resistive barrier on a wood-framed exterior wall assembly. APA Rated Panel Siding Over Wood Structural Panel Sheathing Typical Details - DT-EWG-7 This detail shows APA Rated siding panels applied over wood structural panel sheathing with a weather-resistive barrier on a wood-framed wall assembly. APA Rated Sheathing Specification Guide - SP-1103 This publication provides an overview of the APA trademark and includes a sample specification for APA Rated Sheathing. APA Rated Siding Exterior or Other Exterior Finish (Code-Recognized Type), 5/8" Type X Gypsum Sheathing, Minimum 15/32" APA Rated Sheathing Exposure 1 OSB or Plywood Typical Details - DT-FR-2 This detail shows a fire-rated wall assembly using wood structural panel sheathing over studs with gypsum wallboard, fire protective membrane, and glass fiber insulation. APA Rated Siding Exterior or Other Exterior Finish (Code-Recognized Type), 5/8" Type X Gypsum Sheathing, Minimum 7/16" APA Rated Sheathing Exposure 1 OSB or Plywood Typical Details - DT-FR-3 This detail shows fire-rated exterior wall assembly with APA rated siding over sheathing, insulation, 2x4 wood framing at 16" on center and Type X gypsum wallboard interior finish. APA Rated Siding Exterior, 5/8" Type X Gypsum Sheathing Typical Details - DT-FR-4 This detail shows a one-hour fire-rated wood-framed wall assembly with Type X gypsum sheathing and wallboard, optional insulation, and APA rated siding exterior finish. APA Rated Siding Panels Over Rigid Foam Insulation Sheathing Technical Note - C465 This publication provides installation recommendations and test results for energy-saving APA Sturd-I-Wall construction APA Rated Sturd-I-Floor (OSB) Specification Guide - SP-1102 This publication provides an overview of the APA trademark and includes a sample specification for APA Rated Sturd-I-Floor (OSB). APA Rated Sturd-I-Floor (Plywood) Specification Guide - SP-1102 This publication provides an overview of the APA trademark and includes a sample specification for APA Rated Sturd-I-Floor (Plywood). APA Rated Sturd-I-Floor 16, 20, and 24 o.c. Typical Details - DT-EWG-8 This detail shows APA Rated Sturd-I-Floor panel installation at 16", 20", or 24" o.c. joist spacing with tongue-and-groove edges over a floor framing system. APA Rated Sturd-I-Floor 32 and 48 o.c. Typical Details - DT-EWG-9 This detail shows APA Rated Sturd-I-Floor panel installation at 32" or 48" o.c. joist spacing with tongue-and-groove joints over a crawl space floor framing system. APA Rated Sturd-I-Floor 48 o.c. Typical Details - DT-EWG-10 This detail shows APA Rated Sturd-I-Floor 48 o.c. panels installed over a post-and-beam floor framing system with 4x4 posts, 4x girders, and tongue-and-groove panel edges. APA Simple Solutions: LVL Beams & Headers Technical Guides - S700 This publication discusses the benefits of using laminated veneer lumber (LVL) beams and headers for window and door framing applications APA Sturd-I-Wall (Horizontal Panel Siding Installation) Typical Details - DT-EWG-12 This detail shows APA Rated horizontal panel siding applied directly to wall framing in an APA Sturd-I-Wall system. APA Sturd-I-Wall (Vertical Panel Installation) Typical Details - DT-EWG-13 This detail shows APA Rated vertical panel siding applied directly to wall framing in an APA Sturd-I-Wall system with weather-resistive barrier. APA System Report 101: Design for Combined Shear and Uplift from Wind System Report - SR-101 This report discusses using wood structural panels to resist uplift from wind, including resistance to lateral shear forces and wind pressure perpendicular to the wall APA System Report 102: APA Simplified Wall Bracing Method System Report - SR-102 This report provides an approach to meet the requirements of the 2024, 2021, 2018, 2015 and 2012 IRC simplified wall bracing (Section R602.12). APA System Report 103: Use of Wood Structural Panels for Energy-Heel Trusses System Report - SR-103 This publication outlines a construction solution to meet the IRC’s lateral and wind uplift load requirements using wood structural panels with raised-heel, or energy-heel, trusses APA System Report 405: Fire Protection of Floors Constructed with Prefabricated Wood I-Joists for Compliance with the International Residential Code System Report - SR-405 This system report provides guidance on fire protection of floors constructed with prefabricated wood I-joist assemblies that comply with 2015, 2018, 2021 and 2024 IRC updates APA Wall Bracing Calculator Quick Start Guide Technical Guides - Q230 This guide provides basic instructions for using the APA Wall Bracing Calculator APA Wood Structural Panels Over Concrete Slabs Technical Topic - TT-007 This publication recommends three methods for the installation of a wood floor system over a concrete slab: sleepers, rigid foam or direct. Apparent and True (shear-free) E Technical Topic - TT-104 This publication explains the difference between apparent modulus of elasticity (MOE) and shear-free MOE in glulam beams Appleton Mills Case Studies - R145 This case study discusses how glulam beams, planks, girders and columns were used to structurally and aesthetically restore the historic Appleton Mills complex in Lowell, MA. Applicability of APA Trademarks on Engineered Wood Products Surface-Coated with Fire Protective Coatings Technical Topic - TT-126 Publication answers common questions about fire-protective coatings. Certification and inspection of products with fire-protective coatings are generally outside the scope of APA. Audrain Museum Case Studies - Q125 This case study explains how glulam beams were used to replace the flooring system of the historic Audrian Building, enabling the building to support multi-ton vintage automobiles. Backer Block Typical Details - DT-IJ-1 This detail outlines backer block installation for single and double I-joist headers. Balcony Design for I-Joist Floor with Lumber Cantilever Technical Topic - TT-125 This publication provides guidance on construction of balconies with solid-sawn dimension lumber attached to I-joist floor systems in supplement to Figure 4 of APA form Z725 Beam at End Wall Bearing, Nailed Typical Details - DT-GB-1 This detail shows glulam beam bearing at an end wall. The beam is supported by trimmer studs and secured to the king stud with 16d nails. Beam at End Wall with Floor Joist Flush with Beam Typical Details - DT-GB-2 This detail shows a glulam beam connection to an end wall with flush floor joists or I-joists connected to the beam. Beam at End Wall with Floor Joist Over Beam Typical Details - DT-GB-3 This detail shows a glulam beam connection to an end wall with I-joists bearing on the beam. Beams Butting Over Wood Support Typical Details - DT-GB-6 This detail shows two glulam beams butting over a wood support, with the beams connected to the support using a steel post cap and through-bolts. Bearing at End Wall, Steel Post Cap Typical Details - DT-GB-8 This detail shows connection of glulam beam bearing on solid-sawn post or glulam column using steel post cap at end wall condition. Bearing at End Wall, Steel Tie Plate Typical Details - DT-GB-9 This detail shows a steel tie plate connection for a glulam beam bearing on a wood support at an end condition. Beauty and the Budget Case Studies - V130 This publication describes how LEVER Architecture used engineered wood to balance design, budget and sustainability goals in a Portland, OR, commercial building project. Beveled SIP Wall Typical Details - DT-SIP-1 This detail shows a SIP wall beveled to support a sloped SIP roof that are connected together with panel screws and nails. It also shows sealant, roofing material and cladding. Brelsford WSU Visitor Center Case Studies - R130 This case study discusses the Brelsford WSU visitor center’s use of several engineered wood products, including CLT and glulam. Brick Counter Flashing Details Typical Details - DT-BB-2 This detail shows chimney counter flashing detail of base flashing over shingle underlayment and roof deck, with counter flashing embedded in brick mortar joint. Brick Veneer Over APA Panel Sheathing Typical Details - DT-EWG-14 This detail shows brick veneer or masonry cladding installed over APA Rated wood structural panel sheathing. Buckling of Wood-Based Panel Siding Technical Note - F410 This publication describes mechanism and construction features that contribute to siding buckling Build a Better Home: Controlling Mold and Mildew Build A Better Home - A525 This publication outlines the characteristics of mold and mildew, the effect they can have on a structure and its inhabitants, and provides methods for prohibiting their growth. Build A Better Home: Moisture-Resistant Foundation Construction Build A Better Home - A520 This publication details common sources of moisture, preventive measures and design details for multiple foundation types, including slab-on-grade, crawl space and full basement. Build a Better Home: Moisture-Resistant Roof Construction Build A Better Home - A535 This publication describes several roof design and weatherproofing methods used to keep water out of a home’s interior. Build a Better Home: Moisture-Resistant Wall Construction Build A Better Home - A530 This publication describes the primary sources of moisture intrusion in wood wall construction and recommends methods to prevent moisture penetration. Build Energy Efficient Walls Technical Guides - J440 This publication provides five basic steps to construct energy-saving wood wall systems that meet code, are durable to the forces of nature and help homeowners save money. Builder Tips: 4 Ways to Minimize Nail Pops Builder Tip - S300 This publication describes how to reduce nail pops through recommended fastener selection and installation Builder Tips: APA Portal Frame Bracing Method Framing Tips Builder Tip - F435 This publication highlights essential details for using the APA narrow wall bracing method around garage openings. Builder Tips: Construct a Solid, Squeak-Free Floor System Builder Tip - Q300 This publication describes how to prevent floor complaints and callbacks with proper floor sheathing installation Builder Tips: How to Minimize Buckling of Asphalt Shingles Builder Tip - K310 Describes installation techniques for plywood and OSB roof sheathing and roof ventilation techniques that will help minimize the potential for buckling of asphalt shingles Builder Tips: Keep Glulam Looking Its Best with Proper Storage and Handling Builder Tip - F455 This publication describes best practices for storage and installation of glued laminated timber (glulam). Builder Tips: Prevent Buckling with Proper Spacing Builder Tip - M300 This publication contains spacing recommendations for APA Rated Sheathing, APA Rated Sturd-I-Floor® and APA Rated Siding. Builder Tips: Proper Selection and Installation of APA Plywood Underlayment Builder Tip - R340 This publication provides an overview of selection, handling, installation and fastening of APA plywood underlayment. Builder Tips: Proper Storage and Handling of Glulam Beams Builder Tip - R540 This publication provides recommendations for storage and handling of glulam beams. Building for High-Wind Resilience in Light-Frame Wood Construction Technical Guides - M310 This publication illustrates nine construction details that improve wind resilience in residential construction, with real-world examples of each design Burn-Through Resistance of OSB Panels Technical Topic - TT-025 This publication discusses fire test results comparing the burn-through resistance of oriented strand board (OSB) and plywood. Calculating Fire Resistance of Glulam Beams and Columns Technical Note - Y245 This publication describes the natural fire resistance of glulam beams and columns and provides fire endurance calculation methods California Wildland Urban Interface Approvals for APA Siding Technical Topic - TT-091 Details the layups for APA 303 grooved plywood sidings (T1-11 and reverse board & batten), representing minimal plywood siding constructions as typically found in the marketplace. Canadian Plywood Grading Guide Technical Guides - Q701 This publication is designed for use by mills as an aid in manufacturing and grading Canadian Standards Association (CSA) plywood panels. Cantilever Detail for Vertical Building Offset with Double I-Joist Typical Details - DT-IJ-2 This detail shows cantilevered double I-joists supporting a vertical building offset and specifies connections to the top plate, blocking panels, and Rim Board or APA WSP closure. Caster Loadings on Plywood Technical Note - X227 This publication discusses recommended maximum caster loadings for various wheel types and sizes on bare plywood, Plyron and overlaid plywood surfaces. Ceiling Flange Hanger Typical Details - DT-SPR-2 This detail shows ceiling flange hanger installation for supporting steel sprinkler system pipes from engineered wood ceiling joists. Ceramic Tile Over Wood Structural Panel Floors Technical Topic - TT-006 This publication describes Tile Council of North America (TCNA) specifications for wood structural panel floor systems under ceramic tile, tested in accordance with ASTM C627 Closed Soffit Typical Details - DT-EWG-15 This detail shows a closed soffit assembly using APA rated roof sheathing and exterior panels for the closed soffit with continuous screened or louvered venting. Coach Screw Hanger Typical Details - DT-SPR-3 This detail shows a coach screw hanger assembly for supporting steel sprinkler pipe from wood framing using filler blocks and sheet metal screws or nails. Concrete Forming Design/Construction Guide Technical Guides - V345 This publication contains grade information, form maintenance recommendations, design information and case studies related to plywood concrete forming Concrete Masonry Crawl Space Foundation Typical Details - DT-BB-1 This detail shows concrete masonry crawl space foundation. Condensation, Causes and Control Technical Note - X485 This publication explains causes of condensation, identifies areas prone to condensation issues, and provides options to control condensation Consejos Para Los Constructores: Evite el Pandeo con un Espaciado Adecuado Builder Tip - M300 LA Recomendaciones de espacio entre paneles de clasificación “APA Rated Sheathing,” los pisos de clase Sturd-I-Floor® de APA y los paneles de clasificación “APA Rated Siding." Consejos Para Los Constructores: Minimice los Clavos Sobresalientes Builder Tip - S300 LA Esta publicación describe cómo reducir los clavos sobresalientes con la selección e instalación recomendada de elementos de fijación. Construction Practices for Wood I-Joist Floor Vibration Retrofit Data File - D720 This publication identifies the causes of and remedies for excessive floor vibration. Construir un Sistema de Piso Sólido, Libre de Chirridos Builder Tip - Q300 LA Esta publicación describe cómo prevenir quejas y arreglos del sistema de piso con una instalación correcta del tablero estructural. Containers and Bins Technical Guides - X235 This publication discusses designing, building and specifying wood structural panel containers and bins for industrial materials handling applications. Continuous Beam Over Intermediate Steel Column Typical Details - DT-GB-10 This detail shows two options for connecting a continuous glulam floor beam to an intermediate steel column using either a steel post cap or steel cap plate. Continuous Floor Beam Over Wood Support Typical Details - DT-GB-11 This detail shows two connection options for a continuous glulam floor beam bearing on a wood support. Controlling Decay in Wood Construction Technical Note - R495 This publication discusses decay fungi and how to prevent/minimize degradation of wood through proper design, storage, construction and maintenance CPVC Hanger - Double Offset Typical Details - DT-SPR-4 This detail shows double offset CPVC sprinkler pipe hanger assembly using 2x4 blocking with sheet metal screws or nails, supporting 3" maximum diameter pipe per NFPA 13. CPVC Hanger - Face Mount Typical Details - DT-SPR-5 This detail shows two installation options for face-mounting CPVC sprinkler pipe hangers to wood blocking using either sheet metal screws or nail-and-block combinations. CPVC Hanger - Offset Typical Details - DT-SPR-6 This detail shows offset hanger installation for CPVC sprinkler system pipes showing two attachment options using backing nuts or sheet metal screws with lumber blocking. CPVC Hanger in Web Bore Typical Details - DT-SPR-7 This detail shows proper installation of a CPVC sprinkler system pipe hanger through an I-joist web bore, with maximum diameter and load requirements per NFPA 13. Cross-Laminated Timber—North American CLT vs. Imported Product Technical Guides - S500 This publication describes the stringent product standards required for cross-laminated timber manufactured in North America, which may not be met by imported products Data File: APA Rim Board in Fire Rated Assemblies Data File - D350 This publication provides recommendations for the use of APA rim board in conjunction with fire-rated wall/floor assemblies, based on the US Forest Product Laboratory testing Data File: Selection, Installation and Preparation of Plywood Underlayment Data File - L335 This publication provides recommendations for the installation and preparation of underlayment under finish flooring in residential and light commercial applications Decay of Engineered Wood Products Customer Service Tip - W505 This publication discusses the causes of fungal decay in wood structural panels and how proper design, construction and maintenance can prevent fungal decay. Deflection Limits in the 2018 IBC for Engineered Wood Products Technical Topic - TT-123 This publication clarifies the applicability of the D+L deflection limits specified in Table 1604.3 of the 2018 IBC, specifically as they pertain to engineered wood products. Design for Force Transfer Around Openings (FTAO) Technical Note - T555 This technical note presents a rational analysis for applying FTAO to walls with asymmetric piers and walls with multiple openings, based on APA modeling and testing Design of Structural Glued Laminated Timber Columns Data File - Y240 This publication provides information on member sizes and layup, design stresses, column design equations and design tables and examples. Designing Diaphragms Over Existing Board Floors or Roofs Technical Topic - TT-097 This publication explains the design considerations for installing a wood structural panel diaphragm over existing board sheathing (decking) in floors or roofs. Destruction of Insects During Manufacture of Wood Structural Panels and Structural Composite Lumber Technical Topic - TT-014 This publication describes various wood structural panel manufacturing processes that result in the eradication of insects Diaphragms and Shear Walls Design and Construction Guide Technical Guides - L350 This publication provides design and construction recommendations for engineered diaphragm systems in floor, shear wall and roof systems Double-Sheathed Shear Walls Technical Topic - TT-115 This technical topic presents the results and discussion of full-scale testing of double-sheathed shear walls with both layers of wood structural panels on a single side. Dusting of Concrete Poured Against Plywood Forms Technical Topic - TT-029 This publication discusses causes of surface dusting on concrete surfaces when poured against plywood forms and provides tips for prevention and remedial action. Effect of Green Lumber Framing on Wood Structural Panel Shear Wall Performance Technical Topic - TT-075 This publication discusses a test program conducted by APA to investigate the effect of constructing shear walls with green framing lumber Effect of Large Diameter Horizontal Holes on the Bending and Shear Properties of Laminated Veneer Lumber (LVL) Technical Note - V900 This publication supplements APA Form G535, providing an analytical tool in situations when horizontal holes in LVL exceeding the prescriptive guidance in APA G535 are necessary Effect of Large Diameter Horizontal Holes on the Bending and Shear Properties of Structural Glued Laminated Timber (Glulam) Technical Note - V700 This publication is a supplement to APA S560, providing an analytical tool in situations when horizontal holes exceeding the prescriptive guidance in APA S560 are necessary Effect of Overdriven Fasteners On Shear Capacity Technical Topic - TT-012 This publication provides suggested guidelines for determining if overdriven fasteners will affect the shear capacity of diaphragm or shear wall construction End and Edge Distances, Loaded and Unloaded Typical Details - DT-SPR-8 This detail shows proper bolt spacing requirements including loaded edge distance, unloaded edge distance, end distance, and spacing between rows of bolts. Energy-Conserving Wall Assemblies Typical Details - DT-EWG-16 This detail shows two energy-conserving exterior wall assemblies. Energy-Heel Truss Attachment to Sheathing Typical Details - DT-RH-1 This detail shows raised heel energy truss attachment to an exterior wall for additional attic insulation space. Engineered Wood Construction Guide Technical Guides - E30 This publication provides a comprehensive overview of engineered wood construction systems for residential, commercial and industrial buildings Engineered Wood Construction Guide: Additional Fire and Building Systems Excerpt - E30X-AFBS Summary of special systems, including fire resistant construction, fire protected assemblies, wind-resistive roofs, energy conservation and panels over metal framing Engineered Wood Construction Guide: Cross-Laminated Timber (CLT) Selection and Specification Excerpt - E30X-CLT This publication is an excerpt from the APA Engineered Wood Construction Guide, focusing on selecting and specifying cross-laminated timber for various building applications Engineered Wood Construction Guide: Floor Construction Excerpt - E30X-FC This publication is an excerpt from the APA Engineered Wood Construction Guide, providing information about floor framing and wood structural panel products Engineered Wood Construction Guide: Glulam Selection and Specification Excerpt - E30X-GL This publication is an excerpt from the APA Engineered Wood Construction Guide, providing a description and specification recommendations for glued laminated timber (glulam) Engineered Wood Construction Guide: I-Joist Selection and Specification Excerpt - E30X-IJ This publication is an excerpt from the APA Engineered Wood Construction Guide, providing a description and specification recommendations for I-joist Engineered Wood Construction Guide: Panel Selection and Specification Excerpt - E30X-PSS This publication is an excerpt from the APA Engineered Wood Construction Guide, providing product descriptions and specification recommendations for wood structural panels Engineered Wood Construction Guide: Rim Board Selection and Specification Excerpt - E30X-RB This publication is an excerpt from the APA Engineered Wood Construction Guide, providing guidance on selecting and specifying rim board Engineered Wood Construction Guide: Roof Construction Excerpt - E30X-RC This publication is an excerpt from the APA Engineered Wood Construction Guide, providing a description and application recommendations for engineered wood roof materials Engineered Wood Construction Guide: Structural Composite Lumber (SCL) Selection and Specification Excerpt - E30X-SCL This publication is an excerpt from the APA Engineered Wood Construction Guide, providing descriptions and specification recommendations for structural composite lumber (SCL) Engineered Wood Construction Guide: Wall Construction Excerpt - E30X-WC This publication is an excerpt from the APA Engineered Wood Construction Guide, providing application recommendations for APA wood structural panel wall sheathing. Engineered Wood Floor Systems (Canada) Construction Guide - R300 Provides specification recommendations for plywood and OSB floor systems, the APA Glued Floor System and installation recommendations for panel subflooring and underlayment Engineered Wood Gets an Easy A Case Studies - W170 This case study discusses two Washington school districts that creatively leveraged the benefits of exposed wood products in newly constructed schools. Engineered Wood Handbook & Grade Glossary Technical Guides - X505 This publication provides a list of engineered wood products and common construction terminology explained in easy-to-understand language. Engineered Wood Products Help Navigate Design Challenges and Tariffs for North Carolina Senior Living Project Case Studies - C440 This case study discusses how engineered wood products helped overcome structural, acoustic and cost challenges at a North Carolina senior living expansion project. Engineered Wood Sprouts Solutions for Supermarket Chain Case Studies - Z110 This case study discusses how a Sprouts grocery store used engineered wood instead of steel for the roof system to solve supply chain challenges and reduce their carbon footprint. Engineered Wood Wall Systems (Canada) Construction Guide - R310 This publication provides an overview of commonly used wall systems and explains how wood structural panels can be used to meet fundamental requirements in wall applications Engineering Solutions for a More Inclusive Community Case Studies - X175 This publication discusses how a California nonprofit incorporated engineered wood into an affordable housing complex to keep costs low and create an inclusive community ESR Joint Evaluation Report - ESR-1040 Boise Cascade Wood Products, LLC SCL:
VERSA-LAM® Laminated Veneer Lumber ESR Joint Evaluation Report - ESR-1053 West Fraser Timber Co. Ltd. SCL:
1.7E, 1.55E, 1.35E  Durastrand® Laminated Strand Lumber (LSL), 1.5E, 1.3E, 0.8E Durastrand® Oriented Strand Lumber (OSL) ESR Joint Evaluation Report - ESR-1144 Boise Cascade Wood Products, LLC I-Joists:
AJS Series Prefabricated Wood I-Joists ESR Joint Evaluation Report - ESR-1210 Roseburg Forest Products Company Rim Board, SCL:
RigidLam® Laminated Veneer Lumber (LVL) and RigidRim® LVL Rim Board ESR Joint Evaluation Report - ESR-1251 Roseburg Forest Products Company I-Joists:
RFPI® Prefabricated Wood I-Joists ESR Joint Evaluation Report - ESR-1262 Interfor I-Joists:
P3 JOIST PJI-40, PJI-60, PJI-65, PJI-80 and PJI-90 I-Joists ESR Joint Evaluation Report - ESR-1301 LP OSB:
LP® SmartSide® and LP® SmartSide® ExpertFinish® Treated-Engineered-Wood Lap, Panel, Shake Lap, Nickel Gap Lap and Vertical Siding ESR Joint Evaluation Report - ESR-1305 PWT I-Joists:
PWT™ I-Joists ESR Joint Evaluation Report - ESR-1336 Boise Cascade Wood Products, LLC I-Joists:
BCI Prefabricated Wood I-Joists ESR Joint Evaluation Report - ESR-1405 Multiple Companies Interfor, IB EWP Inc., Nordic Structures, Resolute Engineered Wood, Roseburg Forest Products Company, Stark Truss Company, Inc.

I-Joists:
Performance Rated I-Joists ESR Joint Evaluation Report - ESR-1618 West Fraser LVL SCL:
West Fraser™ LVL Laminated Veneer Lumber ESR Joint Evaluation Report - ESR-1742 Nordic Structures I-Joists:
Nordic Joist Prefabricated I-Joists ESR Joint Evaluation Report - ESR-1940 Multiple Companies Canfor, WFP Engineered Products, LLC

Glulam:
Glued-Laminated Timber Combinations and the GAP Computer Program ESR Joint Evaluation Report - ESR-2725 Tolko Industries Ltd. SCL:
T-TEC® LSL, T-TEC® ZB Treated LSL, and T-TEC® LVL ESR Joint Evaluation Report - ESR-2909 PWT Rim Board, SCL:
PWT™ Laminated Veneer Lumber (LVL), PWT™ Treated LVL and PWT™ Rim Boards ESR Joint Evaluation Report - ESR-2913 Murphy Company SCL:
Murphy Laminated Veneer Lumber (LVL) ESR Joint Evaluation Report - ESR-2919 Stark Truss Company, Inc. I-Joists:
Stark Truss SI-40, SI-60 and SI-80 Series Prefabricated Wood I-Joists ESR Joint Evaluation Report - ESR-3631 OK Laminators, Inc. CLT:
OK Laminators CLT ESR Joint Evaluation Report - ESR-4733 SmartLam NA Columbia Falls, LLC CLT:
SmartLam Cross-Laminated Timber (CLT) ESR Joint Evaluation Report - ESR-4759 Freres Lumber Co., Inc. SCL:
Freres Single Ply Laminated Veneer Lumber ESR Joint Evaluation Report - ESR-4760 Freres Lumber Co., Inc. SCL, CLT:
Freres Mass Ply Panel (MPP) and Mass Ply Lams (MPL) beams and columns ESR Joint Evaluation Report - ESR-4874 Nordic Structures Glulam:
Nordic Lam ESR Joint Evaluation Report - ESR-4875 Nordic Structures CLT:
Nordic X-LAM CLT ESR Joint Evaluation Report - ESR-5157 Boise Cascade Wood Products, LLC CLT, SCL:
Boise Cascade Veneer Laminated Timber ESR Joint Evaluation Report - ESR-5815 Vaagen Timbers, LLC Glulam:
Vaagen Structural Glued Laminated Timber Evaluation of Check Size in Glued Laminated Timber Beams Technical Note - R475 This publication discusses checking in glulam beams and includes a flowchart and equations for determining allowable check size Exemption of Special Inspection on Glulam Based on the 2019 California Building Code Technical Topic - TT-108 This publication clarifies the intent of the California Building Code exemption for special inspection on glulam outlined in Section 1705.5.4 Exterior Deck Water-Resistive System Typical Details - DT-BB-3 This detail shows exterior deck ledger connection to wood I-joist floor system of water-resistant flashing. Eye Rod Hanger Typical Details - DT-SPR-9 This detail shows eye rod hanger for supporting steel sprinkler pipes from wood framing using filler blocks and sheet metal screws or nails per NFPA 13 requirements. FAQs About Oriented Strand Board Technical Topic - TT-133 This publication discusses buckling, fastener recommendations, surface flaking, thickness swell, linear expansion and moisture management of OSB wood structural panels FAQs: Questions About Structural Plywood and OSB Performance FAQ - F505 This publication answers questions about structural plywood and OSB panel performance, grade, growth and natural characteristics. FAQs: Questions About Wood Structural Panel Exposure to Excessive Moisture FAQ - X501 This publication provides guidance about the serviceability of wood structural panels (plywood and OSB) after exposure to high levels of moisture. Fastener Loads for Plywood - Screws Technical Note - E830 This publication summarizes APA test data on ultimate withdrawal and ultimate lateral loads for plywood joints fastened with wood screws and sheet metal screws. Field Notching and Drilling of Glued Laminated Timber Beams Technical Note - S560 This publication provides guidance for notching and drilling on glulam when the end notching and drilling of horizontal though-thickness holes cannot be avoided Field Notching and Drilling of Laminated Veneer Lumber Technical Note - G535 This publication provides guidance for notching and drilling on LVL when the end notching and drilling of horizontal through-thickness holes cannot be avoided. Field Repairs of Plywood Technical Note - J805 This publication describes methods for field restoration of plywood to near its original condition and appearance Finishing APA Rated Siding Builder Tip - Q350 This publication describes recommended finishes and application recommendations for APA Rated Siding. Finishing Glued Laminated Timbers Technical Topic - TT-033 This publication discusses recommendations and exceptions for finishing glulam manufactured entirely from solid-sawn lumber. Fire Protective Options for I-Joist Floor Systems Construction Guide - R425 Describes several options that satisfy fire-protection provisions of the 2012, 2015 and 2018 IRC related to I-joist floor systems, including construction details Fire Resistance of Structural Composite Lumber Technical Topic - TT-118 This publication provides a summary of structural composite lumber (SCL) fire performance based on model building codes and research literature. Fire-Rated Systems Design and Construction Guide Technical Guides - W305 This publication is a guide to cost-effective fire-rated wood and wood structural panel systems that meet code requirements Fire-Retardant-Treated (FRT) Plywood Technical Note - K320 Discusses fire-retardant-treated plywood specifications, code-compliant applications, testing standards and structural requirements for commercial and residential construction. Fire-Retardant-Treated Structural Glued Laminated Timber Technical Topic - TT-127 This publication provides a summary of results of an APA/USDA Forest Product Laboratory pilot test program examining structural properties of Fire-Retardant Treated glulam. First Tech Federal Credit Union Case Studies - U115 This case study discusses how CLT panels and glulam framing delivered cost savings, a faster schedule and sustainability benefits for First Tech Federal Credit Union. Flame Spread Index of APA Performance-Rated Wood Structural Panels Technical Topic - TT-010 This publication summarizes surface burning characteristics (flame spread and smoke development) of wood structural panels tested in accordance with ASTM E84 Flame-Spread Rating for Oriented Strand Board (OSB) Sheathing in Canada Technical Topic - TT-128 This publication discusses the results of a series of CAN/ULC-S102 tests of flame-spread rating (FSR) and smoke developed classification (SDC) for OSB sheathing in Canada Floor Squeaks: Causes, Solutions and Prevention Technical Note - C468 This publication discusses typical floor squeak causes and provides corrections and preventative measures. FM Class 1-105 Typical Details - DT-EWG-17 This detail shows an FM Class 1-105 rated flat roof assembly using wood structural panels over open-web trusses. FM Class 1-120 Typical Details - DT-EWG-18 This detail shows an FM Class 1-120 rated flat roof assembly using wood structural panels over steel joists. FM Class 1-135 Typical Details - DT-EWG-19 This detail shows an FM Class 1-135 rated flat roof assembly using wood structural panels. FM Class 1-90 Typical Details - DT-EWG-20 This detail shows an FM Class 1-90 rated flat roof assembly using wood structural panels with foam insulation, fiberboard cover board, and built-up or modified bitumen roofing. Foam SIP Ridge Cap Detail Typical Details - DT-SIP-2 This detail shows roof SIPs sloped up to form a ridge and connections of the SIPs to framing members with panel screws, while also showing tape, sealant, and roofing materials. Force Transfer Around Openings Shear Walls Typical Details - DT-FTO-1 This detail shows the layout of a force transfer around opening shear wall. Formaldehyde and Engineered Wood Products Technical Note - J330 This publication addresses concerns related to formaldehyde in engineered wood products and explains their exemption from leading formaldehyde emission standards and regulations. Framing Anchor to Backer Block Typical Details - DT-IJ-3 This detail shows installation of backer and filler blocks for a double I-joist header supporting a stair stringer that is attached with a framing anchor. Frequently Asked Questions About Portal Frames Technical Topic - TT-080 This publication answers FAQs about portal frame construction from the APA 2018 IRC wall bracing webinar series Garage Door Header to End Wall, King Stud Nailed to Beam Typical Details - DT-GH-1 This detail shows a connection of a garage door header at and end wall where a glulam beam is connected to a king stud with nails. Garage Door Header to End Wall, Steel Tie Plate Typical Details - DT-GH-2 This detail shows a connection of a garage door header and an end wall using a steel plate fastened to a solid wood post, glulam column or studs. Glued Laminated Beam Design Tables Technical Guides - S475 This publication provides recommended design load tables for glulam beam roof and floor applications Glulam Appearance Classifications for Construction Applications Technical Note - Y110 This publication clarifies the distinction between appearance considerations and structural properties of glulam timbers and appearance classifications of glulam members. Glulam Beam Camber Technical Note - S550 This publication discusses how camber reduces the adverse effects of beam deflection Glulam Connection Details Construction Guide - T300 This publication shows correct connections and common connection errors involving glued laminated (glulam) timbers Glulam Floor Beams Technical Guides - C415 This publication contains span tables for glulam floor beams in residential construction, tables for substituting glulam for steel beams and design details. Glulam Garage Door Headers Offer Design Options Technical Guides - C410 This publication provides connection details and installation recommendations for glulam in residential garage door framing. Glulam in Residential Building Construction Guide Technical Guides - X450 Describes the selection, specification, design considerations and allowable load tables for APA-trademarked glulam used in residential headers, floor beams and roof beams. Glulam or Multi-Structural Composite Lumber Beams Typical Details - DT-IJ-4 This detail shows I-Joists with top mount hangers supported by a multi-ply structural composite lumber (SCL) beam. This detail is similar for a glulam beam with face mount hangers. Glulam Product Guide Product Guide - X440 This product guide provides an overview of APA trademarked glulam and discusses design considerations, applications and specification Going for Bold: Window Into Affordability Case Studies - X170 This case study discusses how the Las Ventanas affordable housing project used glulam, LVL, OSB and FTAO design principles to cut costs and streamline construction. Green Verification Report - GR-L233 PWT SCL, Rim Board:
PWT™ Laminated Veneer Lumber and Rim Board Green Verification Report - GR-L238 PWT I-Joists:
PWT™ I-Joists Green Verification Report - GR-L251 Rosboro Glulam:
Rosboro Structural Glued Laminated Timber Green Verification Report - GR-L259 Roseburg Forest Products Company I-Joists:
Roseburg RFPI® Series I-Joists Green Verification Report - GR-L274 Nordic Structures I-Joists:
Nordic Joist™ Prefabricated Wood I-Joists Green Verification Report - GR-L289 Roseburg Forest Products Company Rim Board, SCL:
RigidLam® LVL, RigidRim® LVL Rim Board Green Verification Report - GR-L294 Nordic Structures Glulam:
Nordic Lam™ Green Verification Report - GR-L306 Nordic Structures CLT:
Nordic X-Lam Green Verification Report - GR-L329 PWT SCL:
PWT™ Preservative-Treated Laminated Veneer Lumber Green Verification Report - GR-L330 IB EWP Inc. I-Joists:
IB Series I-Joists Green Verification Report - GR-L343 Zip-O-Laminators, LLC Glulam, Rim Board:
Zip-O-Laminators Glulam, Zip-Rim Hanging Floor for SIPs Typical Details - DT-SIP-3 This detail shows how to attach a floor system in between the top and bottom of two SIP walls by hanging the joists at the top of a SIP with top mount hangers and a cap plate. HarborCenter Case Studies - S110 This case study discusses the use of hybrid trusses combining glulam arches, glulam purlins and steel bottom chords at the Buffalo Sabres’ practice ice rinks. Heavily Loaded Drywall Carts Technical Topic - TT-024 This publication discusses how to avoid floor panel puncture from drywall carts by consulting PS 2 for minimum concentrated static loads and heavy concentrated loads Heavy Timber Construction Typical Details - DT-EWG-21 This detail shows a heavy timber roof construction assembly using APA Rated Sturd-I-Floor T&G panels over structural glulam or solid timber beams with built-up roofing. Holes in Blocking Used in Engineered Wood Construction Technical Topic - TT-040 This publication discusses the placement of holes in the webs of I-joists or rim board when used as blocking for lateral restraint of floor and roof joists Holes in Structural Glued Laminated Timber (Glulam) Rim Board in Light-Frame Wood Construction Technical Topic - TT-135 Provides recommendations for hole size and segment length for glulam rim board for situations where holes are not specified in the construction documents or shop drawings. Horizontal Beltline Joints Typical Details - DT-EWG-22 This detail shows three horizontal beltline joint configurations for APA panel siding at floor lines in multistory construction. Horizontal Wall Joints Typical Details - DT-EWG-23 This detail shows three horizontal joint configurations for APA panel siding — butt and flash, lap, and shiplap — each with blocking flatwise or edgewise at the joint location. I-Joist Blocking Panel Typical Details - DT-IJ-5 This detail shows the installation of PRI blocking panels between I-joists, attached to top plate with face nails for shear transfer at floor sheathing boundaries. I-Joist Cantilever Detail for Balconies Typical Details - DT-IJ-6 This detail outlines proper construction methods for cantilevered I-joist floor extensions, such as balconies. I-Joist Fire Assembly with 0.5 inch Gypsum Board Above Flange Typical Details - DT-FPF-4 This detail shows an I-joist floor assembly with 1/2" gypsum board placed above the bottom flange for fire protection per IRC Section R503. I-Joist Fire Assembly with 5/8" inch Gypsum Board Above Flange Typical Details - DT-FPF-5 This detail shows an I-joist floor assembly with 5/8" gypsum board placed above the bottom flange for fire protection per IRC Section R503. I-Joist Fire Assembly with Gypsum Board Typical Details - DT-FPF-2 This detail shows 1/2" gypsum board fastened to the bottom flange of an I-joist floor assembly for fire protection per IRC Section R702.3.1. I-Joist Fire Assembly with Gypsum Board at Bottom Flange Typical Details - DT-FPF-1 This detail shows 1/2" gypsum board or 5/8" wood structural panel installed at the bottom flange of an I-joist floor assembly for fire protection per IRC Section R702.3. I-Joist Fire Assembly with Gypsum Board at Web Holes Typical Details - DT-FPF-3 This detail shows 1/2" gypsum board installed at I-joist web holes for fire protection, shown in two configurations per IRC Section R702.3.1. I-Joist Fire Assembly with Mineral Wool Typical Details - DT-FPF-7 This detail shows an I-joist floor assembly with mineral wool insulation for fire protection per IRC Section R503. I-Joist Fire Assembly with Rockwool Safe'n'Sound Typical Details - DT-FPF-6 This detail shows an I-joist floor assembly with Rockwool Safe'n'Sound mineral wool insulation for fire protection per IRC Section R503. I-Joist Floor Details for 2-Inch-Thick Foundation Foam Insulation Technical Topic - TT-129 This publication presents four construction details for incorporating 2-inch-thick foundation foam insulation into residential I-joist floor assemblies. I-Joists Bearing on Floor Beam Typical Details - DT-GB-12 This detail shows I-joists bearing on a glulam floor beam with face nail connections and blocking not shown for clarity. IECC Compliance Options for Wood-Frame Wall Assemblies Technical Guides - P320 Joint ICC and APA publication describes how energy performance is measured in exterior wall assemblies and how to improve wall thermal performance to meet energy code requirements Imported Plywood Panels from Brazil Product Advisory - SP-1185 This publication provides test results for imported plywood panels from Brazil, evaluated for conformance to U.S. Product Standard PS 1 Installation of APA Plywood Underlayment Typical Details - DT-EWG-24 This detail shows APA plywood underlayment installation over APA Rated sheathing subfloor. Installation of Stucco Exterior Finish Over Wood Structural Panel Wall Sheathing Data File - Q370 This publication describes recommended wall construction methods for the installation of stucco exterior finish over structural wood panel wall sheathing Insulated Three-Stud Corner (California Corner) Typical Details - DT-AF-2 This detail shows an insulated three-stud outside corner (California corner) framing assembly. Insulated Three-Stud Corner (Inside Corner) Typical Details - DT-AF-3 This detail shows an insulated three-stud inside corner framing assembly. Intersecting Wall Connection Typical Details - DT-AF-4 This detail shows connections of intersecting single 2x top plates with steel plates and alternate lumber splice connections. Introduction to Lateral Design Technical Guides - X305 This publication explains how to design wood-frame buildings to withstand the lateral loads typical of high wind and seismic zones. Introduction to Wall Bracing Technical Guides - F430 This publication explains IRC-compliant wall bracing, explains why bracing is important and shows how to meet basic requirements for wall bracing in accordance with the code Jackson Hole Airport Case Studies - R110 This case study explains how glulam beams and Douglas-fir columns helped the Jackson Hole Airport meet strict height limits and seismic demands. Joint Research Report: Evaluation of Force Transfer Around Openings - Experimental and Analytical Studies Research Report - M410 This report contains research results on force transfer around openings (FTAO). This study was a joint effort between APA, the USDA FPL and the UBC. Joists Mounted Flush with Floor Beam Typical Details - DT-GB-13 This detail shows two floor joist flush connections options: one face mounted hanger and one top mounted hanger. La Importancia de Cumplir con la Normativa del Encofrado de Concreto Technical Guides - A236 LA las especificaciones de la norma PS 1 para madera contrachapada para cumplir con los criterios de rendimiento de los materiales establecidos en ACI 318/347, según lo exige el IBC Laboratory Tests Evaluate Design Values of Thermo-Ply® Red Product Advisory - SP-1172 This product advisory contains results of testing to measure the shear wall performance of Thermo-Ply® sheathing Ladder Junction Typical Details - DT-AF-5 This detail shows an advanced framed wall junction with single top plates and 2x ladder blocking spaced vertically at 24” O.C. for an interior wall to exterior wall connection. Laminated Veneer Lumber Dimension Adjustment Factors for Compliance with NIST Handbook 130 Technical Topic - TT-131 This publication provides procedures for adjusting dimensional measurements of laminated veneer lumber (LVL) in compliance with NIST Handbooks 130 and 133. Large Opening Single Headers Typical Details - DT-AF-6 This detail shows the use of a single header with a width less than the wall to create more space for insulation. Lateral Load Connections for Low-Slope Roof Diaphragms Data File - Z350 This publication describes techniques and products for code-required connections in wood roof systems in high wind and seismic zones. LeMay America's Car Museum Case Studies - N115 This case study discusses how curved glulam beams enabled dramatic design, seismic resilience and cost effectiveness for the LeMay Car Museum in Tacoma, Washington. Lightweight or Gypsum Concrete Topping, 15/32" APA Wood Structural Panel Subfloor, 3-Dimensional Detail Typical Details - DT-FR-5 This detail shows three-dimensional floor assembly of APA wood structural panel subflooring with gypsum concrete topping over joists and Type X gypsum wallboard ceiling below. Load Carried by Flanges Typical Details - DT-SPR-11 Installation detail for supporting steel sprinkler pipes from structural framing using hanger blocks with fastening specifications for different pipe sizes and loads. Load-Bearing Fire-Rated Wall Assemblies with OSB & Plywood Wall Sheathing Technical Topic - TT-063 This publication discusses the advantages of using IBC and UL recognized oriented strand board (OSB) and plywood wall assemblies over other products. Load-Bearing Interior (Chase) Wall System Typical Details - DT-FR-6 Fire-rated load bearing interior chase wall assembly with gypsum wallboard, plywood sheathing, insulation cavity, and 1-inch space between stud walls at 16- or 24-inch centers. Load-Span Tables for APA Wood Structural Panels Technical Note - Q225 This publication contains uniform load tables for APA trademarked wood structural panels that are manufactured and qualified in accordance with PS 1, PS 2 and APA PRP-108 Lone Survivor House Case Studies - R115 This case study discusses how glulam beams solved complex structural challenges on a pentagon-shaped coastal house. Longitudinal Top Plate Splice Typical Details - DT-AF-7 Lumber Cantilever Detail for Balconies Typical Details - DT-IJ-7 This detail outlines a construction method for balconies using cantilevered lumber extensions attached to I-joists at their back span. Lumber Joists Bearing on Floor Beams Typical Details - DT-GB-14 This detail shows a cross-section of sawn lumber floor joists secured by toe nails supported by a glulam beam. Luxury Boulder Residence Case Studies - R135 This case study discusses how glulam beams reduced costs and streamlined installation on a 5,200 square foot custom Colorado home. Main and Side Members Typical Details - DT-SPR-12 This detail shows fastener connection between main member (last member penetrated) and side member (first member penetrated) in wood construction. Mass Timber Has Banks Seeing Green Case Studies - V135 This case study discusses how CLT and glulam helped First United Bank achieve construction and energy efficiencies. Materials Handling Technical Guides - M200 This publication discusses the use of APA-trademarked wood structural panels in materials handling applications including pallets, crates, bins, shelving and mezzanine floors. Method ABW – Alternate Braced Wall Typical Details - DT-WB-2 This detail shows the alternate braced wall bracing method and its requirements including sheathing fastening, framing requirements, and foundation anchorage. Method CS-PF - Continuously Sheathed Portal Frame Panel Construction Typical Details - DT-WB-4 This detail shows the wall bracing method continuously sheathed portal frame and its requirements including anchorage, minimum member sizes, and sheathing attachment. Method PFG – Intermittent Portal Frame at Garage Door Openings in SDC A, B and C Typical Details - DT-WB-7 This detail shows the wall bracing method portal frame at a garage and its requirements including sheathing attachment, minimum member sizes, and anchorage. Method PFH – Intermittent Portal Frame with Hold Down Typical Details - DT-WB-9 This detail shows the wall bracing method portal frame with hold down and its requirements including minimum framing sizes, sheathing attachment, hold-downs, and anchorage. Minimizing Buckling of Wood Structural Panels Technical Note - D481 Provides design and construction practices that reduce the potential for buckling of wood structural panel sheathing caused by wood expansion due to increased moisture conditions. Minimizing Floor Vibration by Design and Retrofit Technical Note - E710 This publication covers vibration perception, fundamental natural frequency, criteria for floor vibration control and guidelines to remedy existing floor vibration problems. Minimum 1/2" APA Rated Siding Exterior Plywood, 1" Rigid Foam Insulation Sheathing; Exterior Finish-Elastomeric Coating, 1" Rigid Foam Insulation Sheathing, Minimum 1/2" APA Rated Sheathing Exposure 1 Plywood Typical Details - DT-FR-7 Fire-rated wall assembly of two UL-rated configurations (U330 and U335) with different exterior finishes over wood framing with mineral wool or glass fiber insulation. Minimum 3/8" APA Rated Siding Exterior Plywood Typical Details - DT-FR-8 This detail shows fire-rated wall assembly detail of 3/8" APA rated plywood siding over Type X gypsum wallboard with optional insulation on 2x4 studs at 16" on center. Moisture Control in Low Slope Roofs Technical Note - R525 This publication provides recommendations for minimizing moisture accumulation in panelized low-slope roof systems in commercial and industrial applications Moisture Exposure Recommendations for Wood Structural Panels Technical Topic - TT-002 This publication provides recommended bond classification appropriate for end use in-service moisture conditions. Moisture-Related Dimensional Stability Technical Topic - TT-028 This publication discusses linear expansion and thickness swell in wood structural panels due to moisture Monthly Housing Report Annual Subscription Market Analysis Reports - MHRS-26 Monthly U.S. & Canadian housing market analysis covering starts, permits, home sales, mortgage rates, remodeling, and wood product demand indicators. Annual subscription. Mulching Engineered Wood Products: An Alternative to Landfills Technical Topic - TT-098 This publication discusses the benefits of mulching construction-related wood scraps, including glued engineered wood products Multiple Small-Diameter Holes for Electrical Cables Technical Topic - TT-132 Recommendations for cutting holes in I-joists, LVL and glulam for electrical cables in compliance with the National Electric Code (NEC) and International Residential Code (IRC) Nail Spacing Recommendations for APA EWS Rim Boards and I-joists Technical Topic - TT-094 This publication provides tables of the minimum recommended nail spacing for APA EWS Rim Boards and I-joists. Nail-Base Sheathing for Siding and Trim Attachment Construction Guide Technical Guides - Q250 Determine the type and spacing of siding fasteners to meet building code requirements when using wood structural panel sheathing as a nail base (also called nailable sheathing) Nailed Box Beam Design Example Technical Topic - TT-116 This publication describes box beam design using engineering mechanics. Nailer Anchored with Power Driven Fasteners Typical Details - DT-WOM-1 This detail shows wood nailer attachment to steel wide flange beam using drive pins to support APA panel deck, secured with power driven fasteners. NFPA 13 Steel Angle Trapeze with Hanger Typical Details - DT-SPR-13 This detail shows steel angle trapeze hanger system for supporting CPVC or steel sprinkler pipes from wood joists per NFPA 13 requirements with two installation options. Noise-Rated Systems Technical Guides - W460 This publication is a guide to noise-rated wood-frame construction systems, including STC and IIC ratings for tested wall and floor assemblies for effective sound control. Noise-Resistant Floor Assembly Typical Details - DT-EWG-26 This detail shows noise-resistant floor/ceiling assembly using APA Rated sheathing subfloor, lightweight concrete topping, resilient channels, and gypsum wallboard. Noise-Resistant Party Wall Typical Details - DT-EWG-27 This detail shows a noise-resistant wall assembly in plan view using staggered 2x4 studs on 2x6 plates with APA Rated sheathing and gypsum wallboard to reduce sound transmission. Non-Load-Bearing Partitions on APA Structural Panels and Floor Joists Technical Note - B429 This publication explains how to determine partition load, including situations where additional joists are required to account for the weight of partition walls. Offset Eye-Socket Hanger Typical Details - DT-SPR-14 This detail shows installation of an offset eye-socket hanger supporting a 4-inch steel sprinkler pipe with filler block bearing and fastening requirements. One North Office Buildings Case Studies - S120 This publication discusses how glulam framing and engineered wood helped Portland’s One North development achieve energy efficiency and sustainability. One-Hour Combustible Floor-Ceiling And Roof-Ceiling Assemblies - I-Joists Typical Details - DT-EWG-28 This detail shows one-hour fire-resistive floor/ceiling assemblies using wood I-joists with APA Sturd-I-Floor decking and gypsum wallboard ceiling systems with furring channels. One-Hour Combustible Floor-Ceiling Assemblies - Lumber Joists Typical Details - DT-EWG-29 This detail shows two one-hour fire-rated floor/ceiling assemblies with lumber joists. One-Hour Fire-Rated Exterior Load-Bearing Wall Assembly Typical Details - DT-EWG-30 One-hour fire-rated exterior wall assembly using APA Rated siding, gypsum sheathing, weather-resistive barrier, and Type X gypsum wallboard over 2x4 wood stud framing. One-Hour Fire-Rated Glulam Beam (Layup for Simple Span) Typical Details - DT-FR-9 This detail shows cross-section of a one-hour fire-rated glulam beam layup configuration with compression lams at top, core lams in center, and tension lams at bottom. One-Hour Load-Bearing Exterior Wall System, 2x6 Studs @ 16" o.c. Typical Details - DT-FR-10 This detail shows a one-hour fire-rated load bearing exterior wall assembly using 2x6 wood studs at 16 inches on center with Type X gypsum wallboard on both sides. One-Hour Load-Bearing Interior Wall System, 2x4 Studs @ 16" o.c. Typical Details - DT-FR-11 One-hour fire-rated interior partition wall assembly with 2x4 wood studs at 16” o.c., 3-1/2-inch mineral wool insulation, and 5/8-inch Type X gypsum wallboard on both sides. One-Hour Load-Bearing Interior Wall System, 2x6 Studs @ 16" o.c. Typical Details - DT-FR-12 This detail shows a one-hour fire-rated interior wall assembly with 2x6 studs at 16 inches on center, mineral wool insulation, and gypsum wallboard on both sides. One-Sided Wood Structural Panel Box Header Typical Details - DT-AF-8 This detail shows a one-sided box header built using wood structural panels on the exterior face of the wall to eliminate conventional headers and increase cavity insulation space. Open Soffit Typical Details - DT-EWG-31 This detail shows APA Rated sheathing panels installed as an open soffit on exposed roof rafters with weather-protected edges. Opening in Non-Load-Bearing Walls Typical Details - DT-AF-10 This detail shows framing for an opening in a non-load-bearing wall using a single opening top plate, cripple studs, and jack studs without conventional headers. Oriented Strand Board Product Guide - W410 This product guide provides an overview of oriented strand board (OSB) and discusses OSB composition, properties, code acceptances and applications Owner's Guide to Understanding Checks in Glued Laminated Timber Technical Guides - F450 This publication addresses common concerns related to checking in glulam and explains how to evaluate if the check effects the glulam’s strength Panel Design Specification Technical Guides - D510 This publication describes recommended design capacities (ASD) and design methods for wood structural panels manufactured under PS 1 and PS 2 and APA Performance Standard PRP-108. Panel Edge Support for Narrow-Width Roof Sheathing Technical Note - R275 This publication provides recommendations from APA research on the performance of 24-inch and narrower roof sheathing panels Panel Thickness Tolerances and Labeling Technical Topic - TT-054 This publication provides guidance on how to comply with NIST panel thickness regulations while still providing for traditional specifications used in the U.S. model building codes Panels Attached Directly to Formed Steel Joist Typical Details - DT-WOM-2 This cross-section detail shows APA panel deck attachment to metal C or box section joist using hardened screwshank nails or self-tapping fasteners with optional adhesive. Panels for Soffit Applications Builder Tip - N330 This publication discusses recommended panels and spans for open and closed soffits. Panels Nailed to Nailable Steel Joists Typical Details - DT-WOM-3 This connection detail shows APA panel deck attachment to nailable steel joists using hardened screwshank nails and 2x4 nailer blocking at panel edges. Performance of Flexible Structural Sheathing Product Advisory - SP-1186 This publication discusses overstated published lateral load design properties of eight flexible structural sheathing products Performance Rated I-Joists Design and Construction Guide Construction Guide - Z725 This publication discusses span ratings, installation details, cantilever designs, architectural specifications and engineering design properties for APA Performance Rated I-Joists Performance Rated Panels Product Guide - F405 This product guide describes performance standards, applications, trademark and performance category information for APA Performance Rated Panels Performance Standards and Qualification Policy for Wood Structural Panels Standards - E445 This publication describes requirements and test methods for APA Performance Rated Panels (APA Rated Sturd-I-Floor®, APA Rated Sheathing and APA Rated Siding). Performance-Rated I-Joist Roof Framing Details Technical Guides - D710 This publication includes recommended construction details for I-joists in roof applications. Permitted Framing Alignment Offsets - Single Top Plates Typical Details - DT-AF-11 This detail shows permitted framing alignment for trusses, floor joists, rafters, and ceiling joists above (or below) studs when using a single top plate. Plywood Design Specification Technical Guides - Y510 This publication includes section properties, recommended design stresses and design methods for plywood manufactured under Voluntary Product Standard PS 1